Retevis RT97S Portable GMRS Repeater


  • Sale
  • Regular price $499.99



New model! This version features an updated case and a DB-9 Female connector for adding an external controller.

The Retevis RT97S is an exciting new UHF repeater certified by the FCC for use on GMRS! The Retevis RT97S has FCC ID 2ASNSRT97.

Featuring 8 GMRS repeater channels, a 10W transmitter with a full 5W output power after the duplexer, and a built-in notch duplexer, all you need to do is add an antenna and feedline to get on the air.

Built into a cable TV amplifier box, the RT97S is rugged and water-resistant. Two power adapters come with the repeater, a 12V/24V cigarette lighter plug, and an AC adapter. A USB programming cable is also included to program the repeater to your channel and CTCSS/DCS tones of choice.

The RT97S is ideal for solar-powered repeater sites where low power and a small footprint are required. At such a small portable size, this repeater is perfect for camping trips or emergency preparedness.

Inside the case, there is a small 10W notch duplexer, an LCD display, a DC-DC power adapter, and the integrated radio module itself. This repeater does NOT simply have two handheld radios inside.

* Please note that this connector does not currently feature a discriminator output which is required for an external controller that will do the CTCSS/DCS tone decoding. However, the repeater can be configured to decode the tones internally. We have only tested it with a URIxB repeater interface for use with the myGMRS Network at this time.

Resources

Programming Guide
USB Driver
Programming Software
DB-9 Connector to URIxB Pinout

Output Power: 5W (After Duplexer)
Antenna Connector: UHF Female (SO-239)
Power: 12V/24V DC Cigarette Lighter Plug or 120V AC Adapter
Programming: USB

 


Simple and effective

LCD display details



Multiple power options

12V/24V DC Power or AC adapter


Specifications

Frequency Range

462.550 - 462.725 MHz (TX),
467.550 - 467.725 MHz (RX)

Channel Capacity

8 GMRS Repeater Channels

Channel Spacing

±12.5KHz Narrow/±25kHz Wide

Operating Voltage

DC12V - 24V

Operating Temperature

-22° F - 140° F (-30° C - 60° C)

Frequency Stability

±2.5ppm

Antenna Impedance

50 Ω

Dimensions

10.25" x 8.3" x 2.8" (260 x 210 x 70mm)

Weight

3.7 lbs (1.66 kg)

Transmitter

Power Output

10W (5W after Duplexer)

Modulation

F3E

Spurious Emission

-60dB or less

Maximum Frequency Deviation

Wide: ±5kHz Narrow: ±2.5kHz

Audio Distortion

5% or less

FM Noise

Wide:≤45dB Narrow :≤40dB

Receiver

Sensitivity(12dB SINAD)

0.2μV (Wide) 0.25μV (Narrow)

Squelch Sensitivity

0.15μV (Wide) 0.2μV (Narrow)

Adjacent Channel Selectivity

≥ 70dB (Wide) / ≥65dB (Narrow)

Intermodulation

≥ 55dB

Spurious Rejection

≥ 55dB

Image Rejection

≥ 55dB

FM Ham and Noise

≤-45dB(Wide) / ≤ -40dB(Narrow)

Modulation Type

F3E

Operating Bandwidth

≤±7KHz / ≤±5KHz

Audio Distortion

≤ 5%

Customer Reviews

Based on 8 reviews
88%
(7)
13%
(1)
0%
(0)
0%
(0)
0%
(0)
R
Rodney Grafing
Great Little Repeater

My family and I had been seeking a solution for a more reliable way to communicate using GMRS. Line of sight was the main issue. We tried different radios and antenna combinations with little improvement. I finally pulled the trigger and ordered the RT 97s. It has exceeded our expectations. No more dead spots or static filled transmissions. It took us less than an hour to set it up and start using it.

L
Lloyd Duck
Happy in West Texas

Great little unit, super easy to setup. If your around Big Spring TX look us up. We’d love to hear you on the air.

J
Jeffrey Donaldson
One slight problem

The repeater arrived well packed and works well. However the DC power supply was crushed. I was able to piece it back together with super glue and it works. I don’t anticipate needing to use it, so I’m not to worried about it.

C
C.K.
No support

No way to update software and usb drivers from the manufactures website. I cant program the device because I am using windows 11 and the usb drivers that are on this page are not supported. So I have tried to contact the manufacturer and they have not responded. I will give it a few more days then Im returning it. You have to have the programing software to get it going. without being able to program it its useless.

j
jonathan
great!!

the portable use of this repeater system is perfect for camping, prepper use, or use around the your property,
its list as 5 watts but the unit it self puts out 10 watts, i can get almost 10 miles on solar and dc power!